AccuSeries Applications for Wastewater and Process Analysis
Explore where AccuSeries online analysers support water treatment, wastewater, industrial effluent, power, refining, semiconductor and chemical-process monitoring.
01
Municipal water and wastewater
Configurable analysis supports drinking-water and wastewater duties including alkalinity, ammonia, chlorine, hardness, metals, nitrate, phosphate and other approved methods. Multi-stream sampling can provide regular process information between required laboratory checks.
02
Industrial wastewater and effluent
Wide-bore fluidics and application-specific sample conditioning help AccuSeries handle turbid, changing samples. Methods can monitor acids, alkalis, ammonia, cyanide, metals, nitrate, phosphate, sulphide and other process-specific analytes.
03
Power, boiler and cooling water
Online wet chemistry supports boiler, steam-cycle and cooling-water control with suitable methods for alkalinity, chloride, hardness, hydrazine, phosphate, silica, sulphate and treatment chemicals.
04
Chemical, refining and gas processing
AccuSeries can be configured for chloro-alkali, brine, amine, caustic scrubber, sour-water, refinery effluent and petrochemical applications where direct process chemistry matters.
05
Semiconductor, plating and metals
Colorimetry, titration and ISE methods support etch baths, plating solutions, rinse water and wastewater measurements including acidity, alkalinity, copper, fluoride, peroxide and selected metals.
06
Food, pharmaceutical and manufacturing
Programmable analysis can monitor process solutions, cleaning chemicals and effluent across food and beverage, pharmaceutical, pulp and paper, textiles and other manufacturing operations.
APPLICATION REVIEW
Define the AccuSeries application
Suitability depends on the analyte, measuring range, sample matrix, method, installation and required analysis frequency.
01.
Parameter
AccuSeries uses application-specific analytical chemistry.
02.
Measuring range
Measuring range depends on the selected method.
03.
Analysis time
Reaction time is typically 3–15 minutes by method.
04.
Reagent use
Reagent consumption varies by parameter and frequency.
05.
Sample condition
Sample colour and suspended solids must be considered.
06.
Sample conditioning
Digestion, extraction or dilution can support challenging samples.
Application details drive analyser performance
Method selection, sample handling, installation conditions and required outputs should be reviewed together.
Up to 6 streams
Configurable sampling supports multiple representative process streams.
3–15 minutes
Typical reaction time depends on the programmed wet-chemistry method.
IP66
The NEMA 4X enclosure supports demanding industrial installation conditions.
Laboratory checks
Online analysis does not replace required accredited laboratory work.
AccuSeries application review
Confirm the analytical method, sample conditions, utilities, outputs and process objective before specification.
| Parameter | Selected analytical chemistry |
| Measuring range | Method specific |
| Sample matrix | Colour and solids considered |
| Analysis time | Parameter dependent |
| Reagent use | Varies by parameter and frequency |
| Sample conditioning | Filtration where required |
| Installation | Indoor; suitable protection outdoors |
| Outputs | According to ordered configuration |
| Verification | Confirm current parameter datasheet |
Current application-specific documentation and the final configured method should be confirmed with PMA before procurement.
Where AccuSeries fits
The analyser provides regular online chemical information across suitable municipal, industrial and process applications.
Wastewater
Monitor treatment, industrial effluent and difficult samples with the appropriate chemistry and conditioning.
Industrial processes
Apply colorimetry, titration or ISE methods to chemical, refining, plating and manufacturing duties.
Water and utilities
Configure multi-parameter analysis for drinking water, boiler water, cooling water and process control.
Online analysis supports, but does not replace, required laboratory work
Accredited laboratory analysis, statutory sampling and application-specific compliance instruments remain necessary where required.
Is AccuSeries right for your online analysis?
Share your analyte, expected concentration range, sample conditions and process objective with PMA to arrange an application review. You can also read PMA’s AccuSeries wastewater and industrial water overview.
Application guides for real process duties
Start with the operating decision, then review the parameter, range, sample matrix, conditioning and verification plan.
Online Water Analyser
Explore online wet-chemistry measurement for drinking, process and treated-water duties with configurable parameters and methods.
Online Wastewater Analyser
Review automated measurement for influent, treatment and discharge monitoring across variable wastewater matrices.
Industrial Water Analyser
Match online chemistry to cooling, process, rinse and utility-water applications where timely control matters.
Wastewater Effluent Monitoring
Track treatment performance and final discharge parameters with repeatable automated analysis.
Boiler Water Analysis
Protect steam systems by monitoring treatment chemistry, contamination and carryover indicators online.
CMP Wastewater Analysis
Apply configurable wet chemistry to complex CMP, fluoride, ammonia and metal-bearing wastewater streams.
Refinery Sour Water Analysis
Monitor sulphide, ammonia and related sour-water chemistry to support treatment and process control.
Chemical Scrubber Control
Measure reagent strength, loading and scrubber-liquor chemistry for stable and efficient operation.
FEATURED WASTEWATER GUIDE
Iron monitoring at sewage treatment works
Define the iron result, sampling point, wastewater matrix and verification plan where iron-based dosing or final-effluent monitoring requires frequent process information.