Online Zinc Analyser
Monitor zinc in industrial wastewater and effluent using automated colorimetric wet chemistry.
Online Zinc Analyser with AccuSeries
AccuSeries can automate online zinc measurement for suitable industrial process-water and effluent duties. Configurable chemistry and sample handling support treatment control and discharge monitoring between laboratory checks. Read PMA’s independent zinc application guide for wider measurement context.
Every configuration is application-specific. Confirm the analyte, expected range, sample composition, temperature, suspended solids, number of streams and required outputs with PMA before selection. Explore the AccuSeries online wet chemistry analyser and its water and process applications.
Programmable online zinc analysis
AccuSeries automates sample handling, method execution, result calculation and reporting for configured zinc measurement while operators monitor status through the graphical interface.
01 / CONFIGURED METHOD
A method matched to zinc and the process
Each analyser is configured around zinc, the required range, sample matrix and recognised analytical method.
- Approved method for zinc
- Configured range and sample matrix
- Method-specific zinc result calculation
02 / AUTOMATIC OPERATION
Sampling, calibration and cleaning
Programmable routines support repeatable zinc measurement while diagnostics and alarms alert users to changing analyser or process conditions.
- Automatic sampling
- Automatic calibration
- Automatic cleaning
A controlled zinc measurement sequence
Each zinc result follows a configured sampling, reagent, measurement, calculation and maintenance sequence.
01.
Capture the sample
The internal fast loop and sample mechanism provide a representative, consistent sample volume for zinc analysis.
02.
Add method reagents
The programmed sequence doses the reagents required for the selected zinc method.
03.
Run the configured method
The approved zinc method proceeds under controlled conditions.
04.
Calculate the zinc result
The measured response is converted into the configured zinc concentration result.
05.
Calibrate
Automatic calibration can run against configured zinc standards at selected intervals.
06.
Clean
Automatic cleaning supports the zinc measurement system between planned maintenance visits.
Designed for practical zinc monitoring
The modular AccuSeries design keeps wet-chemistry components accessible while zinc results, diagnostics and method controls remain available through the interface.
Touchscreen
Clear access to zinc results, status and analyser functions.
Data logging
Integrated zinc result storage with USB export.
Separate compartments
Electronic and wet-chemistry sections are physically separated.
Low reagent use
Small reagent volumes help control zinc measurement costs.
Zinc technical specifications
Core AccuSeries information for zinc application and specification review.
| Measurement principle | Application-specific approved method |
| Variables | Zinc, range and sample matrix dependent; approved method |
| Typical response | T-90 typically 3 to 15 minutes; method dependent |
| Power supply | 24 VDC or 90 to 240 VAC; 310 W |
| Sampling | Single stream or up to 6 streams |
| Cabinet | Painted 304 stainless steel |
| Protection grade | IP66; NEMA 4X |
| Outputs | 4-20 mA; optional Modbus TCP/IP or serial |
| Automatic functions | Sampling, calibration, validation and post-wash as configured |
Zinc, range, sample conditions, wetted materials and final specifications must be confirmed for the configured method before procurement.
Discuss your zinc measurement
Tell PMA about your sample, measuring range and process objective. An applications engineer will review whether AccuSeries and an available analytical method are appropriate.
Win A Google Pixel Tablet
From pH panels to sludge settlement analysers, PMA delivers the instrumentation and support your facility relies on. We are currently offering a Google Pixel Tablet to one lucky operator who contacts us to discuss a project or service requirement.
Terms and conditions apply. Prize draw entry requires a valid enquiry regarding PMA Ltd products or services. Valid for UK and Ireland residents only.