Online Tin Analyser
Measure tin in plating, manufacturing and industrial wastewater for treatment and discharge control.
Online Tin Analyser with AccuSeries
AccuSeries can provide automated tin measurement in suitable plating, manufacturing and wastewater applications. Method configuration reflects the expected tin form, concentration, sample matrix and required analysis interval. Read PMA’s independent tin application guide for wider measurement context.
Every configuration is application-specific. Confirm the analyte, expected range, sample composition, temperature, suspended solids, number of streams and required outputs with PMA before selection. Explore the AccuSeries online wet chemistry analyser and its water and process applications.
Programmable online tin analysis
AccuSeries automates sample handling, method execution, result calculation and reporting for configured tin measurement while operators monitor status through the graphical interface.
01 / CONFIGURED METHOD
A method matched to tin and the process
Each analyser is configured around tin, the required range, sample matrix and recognised analytical method.
- Approved method for tin
- Configured range and sample matrix
- Method-specific tin result calculation
02 / AUTOMATIC OPERATION
Sampling, calibration and cleaning
Programmable routines support repeatable tin measurement while diagnostics and alarms alert users to changing analyser or process conditions.
- Automatic sampling
- Automatic calibration
- Automatic cleaning
A controlled tin measurement sequence
Each tin result follows a configured sampling, reagent, measurement, calculation and maintenance sequence.
01.
Capture the sample
The internal fast loop and sample mechanism provide a representative, consistent sample volume for tin analysis.
02.
Add method reagents
The programmed sequence doses the reagents required for the selected tin method.
03.
Run the configured method
The approved tin method proceeds under controlled conditions.
04.
Calculate the tin result
The measured response is converted into the configured tin concentration result.
05.
Calibrate
Automatic calibration can run against configured tin standards at selected intervals.
06.
Clean
Automatic cleaning supports the tin measurement system between planned maintenance visits.
Designed for practical tin monitoring
The modular AccuSeries design keeps wet-chemistry components accessible while tin results, diagnostics and method controls remain available through the interface.
Touchscreen
Clear access to tin results, status and analyser functions.
Data logging
Integrated tin result storage with USB export.
Separate compartments
Electronic and wet-chemistry sections are physically separated.
Low reagent use
Small reagent volumes help control tin measurement costs.
Tin technical specifications
Core AccuSeries information for tin application and specification review.
| Measurement principle | Application-specific approved method |
| Variables | Tin, range and sample matrix dependent; approved method |
| Typical response | T-90 typically 3 to 15 minutes; method dependent |
| Power supply | 24 VDC or 90 to 240 VAC; 310 W |
| Sampling | Single stream or up to 6 streams |
| Cabinet | Painted 304 stainless steel |
| Protection grade | IP66; NEMA 4X |
| Outputs | 4-20 mA; optional Modbus TCP/IP or serial |
| Automatic functions | Sampling, calibration, validation and post-wash as configured |
Tin, range, sample conditions, wetted materials and final specifications must be confirmed for the configured method before procurement.
Discuss your tin measurement
Tell PMA about your sample, measuring range and process objective. An applications engineer will review whether AccuSeries and an available analytical method are appropriate.
Win A Google Pixel Tablet
From pH panels to sludge settlement analysers, PMA delivers the instrumentation and support your facility relies on. We are currently offering a Google Pixel Tablet to one lucky operator who contacts us to discuss a project or service requirement.
Terms and conditions apply. Prize draw entry requires a valid enquiry regarding PMA Ltd products or services. Valid for UK and Ireland residents only.