Online Molybdate and Molybdenum Analyser
Monitor molybdate treatment chemicals and molybdenum in cooling water, boiler water and industrial effluent.
Online Molybdate and Molybdenum Analyser with AccuSeries
AccuSeries can automate molybdate or molybdenum measurement in suitable cooling-water, boiler-water and industrial wastewater applications. Online results can support corrosion-inhibitor control and discharge monitoring when the method and range are confirmed. Read PMA’s independent molybdate and molybdenum application guide for wider measurement context.
Every configuration is application-specific. Confirm the analyte, expected range, sample composition, temperature, suspended solids, number of streams and required outputs with PMA before selection. Explore the AccuSeries online wet chemistry analyser and its water and process applications.
Programmable online molybdate and molybdenum analysis
AccuSeries automates sample handling, method execution, result calculation and reporting for configured molybdate and molybdenum measurement while operators monitor status through the graphical interface.
01 / CONFIGURED METHOD
A method matched to molybdate and molybdenum and the process
Each analyser is configured around molybdate and molybdenum, the required range, sample matrix and recognised analytical method.
- Approved method for molybdate and molybdenum
- Configured range and sample matrix
- Method-specific molybdate and molybdenum result calculation
02 / AUTOMATIC OPERATION
Sampling, calibration and cleaning
Programmable routines support repeatable molybdate and molybdenum measurement while diagnostics and alarms alert users to changing analyser or process conditions.
- Automatic sampling
- Automatic calibration
- Automatic cleaning
A controlled molybdate and molybdenum measurement sequence
Each molybdate and molybdenum result follows a configured sampling, reagent, measurement, calculation and maintenance sequence.
01.
Capture the sample
The internal fast loop and sample mechanism provide a representative, consistent sample volume for molybdate and molybdenum analysis.
02.
Add method reagents
The programmed sequence doses the reagents required for the selected molybdate and molybdenum method.
03.
Run the configured method
The approved molybdate and molybdenum method proceeds under controlled conditions.
04.
Calculate the molybdate and molybdenum result
The measured response is converted into the configured molybdate and molybdenum concentration result.
05.
Calibrate
Automatic calibration can run against configured molybdate and molybdenum standards at selected intervals.
06.
Clean
Automatic cleaning supports the molybdate and molybdenum measurement system between planned maintenance visits.
Designed for practical molybdate and molybdenum monitoring
The modular AccuSeries design keeps wet-chemistry components accessible while molybdate and molybdenum results, diagnostics and method controls remain available through the interface.
Touchscreen
Clear access to molybdate and molybdenum results, status and analyser functions.
Data logging
Integrated molybdate and molybdenum result storage with USB export.
Separate compartments
Electronic and wet-chemistry sections are physically separated.
Low reagent use
Small reagent volumes help control molybdate and molybdenum measurement costs.
Molybdate and Molybdenum technical specifications
Core AccuSeries information for molybdate and molybdenum application and specification review.
| Measurement principle | Application-specific approved method |
| Variables | Molybdate and Molybdenum, range and sample matrix dependent; approved method |
| Typical response | T-90 typically 3 to 15 minutes; method dependent |
| Power supply | 24 VDC or 90 to 240 VAC; 310 W |
| Sampling | Single stream or up to 6 streams |
| Cabinet | Painted 304 stainless steel |
| Protection grade | IP66; NEMA 4X |
| Outputs | 4-20 mA; optional Modbus TCP/IP or serial |
| Automatic functions | Sampling, calibration, validation and post-wash as configured |
Molybdate and Molybdenum, range, sample conditions, wetted materials and final specifications must be confirmed for the configured method before procurement.
Discuss your molybdate and molybdenum measurement
Tell PMA about your sample, measuring range and process objective. An applications engineer will review whether AccuSeries and an available analytical method are appropriate.
Win A Google Pixel Tablet
From pH panels to sludge settlement analysers, PMA delivers the instrumentation and support your facility relies on. We are currently offering a Google Pixel Tablet to one lucky operator who contacts us to discuss a project or service requirement.
Terms and conditions apply. Prize draw entry requires a valid enquiry regarding PMA Ltd products or services. Valid for UK and Ireland residents only.