Online Lead Analyser
Monitor lead in water and industrial effluent using application-specific automated wet chemistry.
Online Lead Analyser with AccuSeries
AccuSeries can be configured for online lead measurement where suitable analytical chemistry and sample conditions are available. PMA reviews the required detection range, matrix, sample preparation and interferences before recommending a configuration. Read PMA’s independent lead application guide for wider measurement context.
Every configuration is application-specific. Confirm the analyte, expected range, sample composition, temperature, suspended solids, number of streams and required outputs with PMA before selection. Explore the AccuSeries online wet chemistry analyser and its water and process applications.
Programmable online lead analysis
AccuSeries automates sample handling, method execution, result calculation and reporting for configured lead measurement while operators monitor status through the graphical interface.
01 / CONFIGURED METHOD
A method matched to lead and the process
Each analyser is configured around lead, the required range, sample matrix and recognised analytical method.
- Approved method for lead
- Configured range and sample matrix
- Method-specific lead result calculation
02 / AUTOMATIC OPERATION
Sampling, calibration and cleaning
Programmable routines support repeatable lead measurement while diagnostics and alarms alert users to changing analyser or process conditions.
- Automatic sampling
- Automatic calibration
- Automatic cleaning
A controlled lead measurement sequence
Each lead result follows a configured sampling, reagent, measurement, calculation and maintenance sequence.
01.
Capture the sample
The internal fast loop and sample mechanism provide a representative, consistent sample volume for lead analysis.
02.
Add method reagents
The programmed sequence doses the reagents required for the selected lead method.
03.
Run the configured method
The approved lead method proceeds under controlled conditions.
04.
Calculate the lead result
The measured response is converted into the configured lead concentration result.
05.
Calibrate
Automatic calibration can run against configured lead standards at selected intervals.
06.
Clean
Automatic cleaning supports the lead measurement system between planned maintenance visits.
Designed for practical lead monitoring
The modular AccuSeries design keeps wet-chemistry components accessible while lead results, diagnostics and method controls remain available through the interface.
Touchscreen
Clear access to lead results, status and analyser functions.
Data logging
Integrated lead result storage with USB export.
Separate compartments
Electronic and wet-chemistry sections are physically separated.
Low reagent use
Small reagent volumes help control lead measurement costs.
Lead technical specifications
Core AccuSeries information for lead application and specification review.
| Measurement principle | Application-specific approved method |
| Variables | Lead, range and sample matrix dependent; approved method |
| Typical response | T-90 typically 3 to 15 minutes; method dependent |
| Power supply | 24 VDC or 90 to 240 VAC; 310 W |
| Sampling | Single stream or up to 6 streams |
| Cabinet | Painted 304 stainless steel |
| Protection grade | IP66; NEMA 4X |
| Outputs | 4-20 mA; optional Modbus TCP/IP or serial |
| Automatic functions | Sampling, calibration, validation and post-wash as configured |
Lead, range, sample conditions, wetted materials and final specifications must be confirmed for the configured method before procurement.
Discuss your lead measurement
Tell PMA about your sample, measuring range and process objective. An applications engineer will review whether AccuSeries and an available analytical method are appropriate.
Win A Google Pixel Tablet
From pH panels to sludge settlement analysers, PMA delivers the instrumentation and support your facility relies on. We are currently offering a Google Pixel Tablet to one lucky operator who contacts us to discuss a project or service requirement.
Terms and conditions apply. Prize draw entry requires a valid enquiry regarding PMA Ltd products or services. Valid for UK and Ireland residents only.