Online Copper Analyser
Monitor copper in plating, semiconductor, process-water and wastewater applications using automated chemistry.
Online Copper Analyser with AccuSeries
AccuSeries supports online copper analysis for suitable industrial water, semiconductor, plating and wastewater samples. Configurable colorimetric chemistry and sample handling help produce repeatable trend data for treatment and discharge control. Read PMA’s independent copper application guide for wider measurement context.
Every configuration is application-specific. Confirm the analyte, expected range, sample composition, temperature, suspended solids, number of streams and required outputs with PMA before selection. Explore the AccuSeries online wet chemistry analyser and its water and process applications.
Programmable online copper analysis
AccuSeries automates sample handling, method execution, result calculation and reporting for configured copper measurement while operators monitor status through the graphical interface.
01 / CONFIGURED METHOD
A method matched to copper and the process
Each analyser is configured around copper, the required range, sample matrix and recognised analytical method.
- Approved method for copper
- Configured range and sample matrix
- Method-specific copper result calculation
02 / AUTOMATIC OPERATION
Sampling, calibration and cleaning
Programmable routines support repeatable copper measurement while diagnostics and alarms alert users to changing analyser or process conditions.
- Automatic sampling
- Automatic calibration
- Automatic cleaning
A controlled copper measurement sequence
Each copper result follows a configured sampling, reagent, measurement, calculation and maintenance sequence.
01.
Capture the sample
The internal fast loop and sample mechanism provide a representative, consistent sample volume for copper analysis.
02.
Add method reagents
The programmed sequence doses the reagents required for the selected copper method.
03.
Run the configured method
The approved copper method proceeds under controlled conditions.
04.
Calculate the copper result
The measured response is converted into the configured copper concentration result.
05.
Calibrate
Automatic calibration can run against configured copper standards at selected intervals.
06.
Clean
Automatic cleaning supports the copper measurement system between planned maintenance visits.
Designed for practical copper monitoring
The modular AccuSeries design keeps wet-chemistry components accessible while copper results, diagnostics and method controls remain available through the interface.
Touchscreen
Clear access to copper results, status and analyser functions.
Data logging
Integrated copper result storage with USB export.
Separate compartments
Electronic and wet-chemistry sections are physically separated.
Low reagent use
Small reagent volumes help control copper measurement costs.
Copper technical specifications
Core AccuSeries information for copper application and specification review.
| Measurement principle | Application-specific approved method |
| Variables | Copper, range and sample matrix dependent; approved method |
| Typical response | T-90 typically 3 to 15 minutes; method dependent |
| Power supply | 24 VDC or 90 to 240 VAC; 310 W |
| Sampling | Single stream or up to 6 streams |
| Cabinet | Painted 304 stainless steel |
| Protection grade | IP66; NEMA 4X |
| Outputs | 4-20 mA; optional Modbus TCP/IP or serial |
| Automatic functions | Sampling, calibration, validation and post-wash as configured |
Copper, range, sample conditions, wetted materials and final specifications must be confirmed for the configured method before procurement.
Discuss your copper measurement
Tell PMA about your sample, measuring range and process objective. An applications engineer will review whether AccuSeries and an available analytical method are appropriate.
Win A Google Pixel Tablet
From pH panels to sludge settlement analysers, PMA delivers the instrumentation and support your facility relies on. We are currently offering a Google Pixel Tablet to one lucky operator who contacts us to discuss a project or service requirement.
Terms and conditions apply. Prize draw entry requires a valid enquiry regarding PMA Ltd products or services. Valid for UK and Ireland residents only.