Online Chlorine and Hypochlorite Analyser
Monitor chlorine-related chemistry in water treatment and chemical processes with automated wet chemistry.
Online Chlorine and Hypochlorite Analyser with AccuSeries
AccuSeries can be configured for chlorine and hypochlorite measurements in suitable water-treatment and industrial process applications. PMA confirms the chemical form, expected concentration, sample stability and analytical method before specification. Review PMA’s AccuSeries overview for wider product and application context.
Every configuration is application-specific. Confirm the analyte, expected range, sample composition, temperature, suspended solids, number of streams and required outputs with PMA before selection. Explore the AccuSeries online wet chemistry analyser and its water and process applications.
Programmable online chlorine and hypochlorite analysis
AccuSeries automates sample handling, method execution, result calculation and reporting for configured chlorine and hypochlorite measurement while operators monitor status through the graphical interface.
01 / CONFIGURED METHOD
A method matched to chlorine and hypochlorite and the process
Each analyser is configured around chlorine and hypochlorite, the required range, sample matrix and recognised analytical method.
- Approved method for chlorine and hypochlorite
- Configured range and sample matrix
- Method-specific chlorine and hypochlorite result calculation
02 / AUTOMATIC OPERATION
Sampling, calibration and cleaning
Programmable routines support repeatable chlorine and hypochlorite measurement while diagnostics and alarms alert users to changing analyser or process conditions.
- Automatic sampling
- Automatic calibration
- Automatic cleaning
A controlled chlorine and hypochlorite measurement sequence
Each chlorine and hypochlorite result follows a configured sampling, reagent, measurement, calculation and maintenance sequence.
01.
Capture the sample
The internal fast loop and sample mechanism provide a representative, consistent sample volume for chlorine and hypochlorite analysis.
02.
Add method reagents
The programmed sequence doses the reagents required for the selected chlorine and hypochlorite method.
03.
Run the configured method
The approved chlorine and hypochlorite method proceeds under controlled conditions.
04.
Calculate the chlorine and hypochlorite result
The measured response is converted into the configured chlorine and hypochlorite concentration result.
05.
Calibrate
Automatic calibration can run against configured chlorine and hypochlorite standards at selected intervals.
06.
Clean
Automatic cleaning supports the chlorine and hypochlorite measurement system between planned maintenance visits.
Designed for practical chlorine and hypochlorite monitoring
The modular AccuSeries design keeps wet-chemistry components accessible while chlorine and hypochlorite results, diagnostics and method controls remain available through the interface.
Touchscreen
Clear access to chlorine and hypochlorite results, status and analyser functions.
Data logging
Integrated chlorine and hypochlorite result storage with USB export.
Separate compartments
Electronic and wet-chemistry sections are physically separated.
Low reagent use
Small reagent volumes help control chlorine and hypochlorite measurement costs.
Chlorine and Hypochlorite technical specifications
Core AccuSeries information for chlorine and hypochlorite application and specification review.
| Measurement principle | Application-specific approved method |
| Variables | Chlorine and Hypochlorite, range and sample matrix dependent; approved method |
| Typical response | T-90 typically 3 to 15 minutes; method dependent |
| Power supply | 24 VDC or 90 to 240 VAC; 310 W |
| Sampling | Single stream or up to 6 streams |
| Cabinet | Painted 304 stainless steel |
| Protection grade | IP66; NEMA 4X |
| Outputs | 4-20 mA; optional Modbus TCP/IP or serial |
| Automatic functions | Sampling, calibration, validation and post-wash as configured |
Chlorine and Hypochlorite, range, sample conditions, wetted materials and final specifications must be confirmed for the configured method before procurement.
Discuss your chlorine and hypochlorite measurement
Tell PMA about your sample, measuring range and process objective. An applications engineer will review whether AccuSeries and an available analytical method are appropriate.
Win A Google Pixel Tablet
From pH panels to sludge settlement analysers, PMA delivers the instrumentation and support your facility relies on. We are currently offering a Google Pixel Tablet to one lucky operator who contacts us to discuss a project or service requirement.
Terms and conditions apply. Prize draw entry requires a valid enquiry regarding PMA Ltd products or services. Valid for UK and Ireland residents only.