Online Chloride Analyser
Measure chloride in water and process streams using configured titration or ion-selective electrode methods.
Online Chloride Analyser with AccuSeries
AccuSeries supports application-specific chloride measurement using potentiometric, argentometric or ion-selective approaches where appropriate. The final method depends on concentration, sample composition and the required reporting interval. Read PMA’s independent chloride application guide for wider measurement context.
Every configuration is application-specific. Confirm the analyte, expected range, sample composition, temperature, suspended solids, number of streams and required outputs with PMA before selection. Explore the AccuSeries online wet chemistry analyser and its water and process applications.
Programmable online chloride analysis
AccuSeries automates sample handling, method execution, result calculation and reporting for configured chloride measurement while operators monitor status through the graphical interface.
01 / CONFIGURED METHOD
A method matched to chloride and the process
Each analyser is configured around chloride, the required range, sample matrix and recognised analytical method.
- Approved method for chloride
- Configured range and sample matrix
- Method-specific chloride result calculation
02 / AUTOMATIC OPERATION
Sampling, calibration and cleaning
Programmable routines support repeatable chloride measurement while diagnostics and alarms alert users to changing analyser or process conditions.
- Automatic sampling
- Automatic calibration
- Automatic cleaning
A controlled chloride measurement sequence
Each chloride result follows a configured sampling, reagent, measurement, calculation and maintenance sequence.
01.
Capture the sample
The internal fast loop and sample mechanism provide a representative, consistent sample volume for chloride analysis.
02.
Add method reagents
The programmed sequence doses the reagents required for the selected chloride method.
03.
Run the configured method
The approved chloride method proceeds under controlled conditions.
04.
Calculate the chloride result
The measured response is converted into the configured chloride concentration result.
05.
Calibrate
Automatic calibration can run against configured chloride standards at selected intervals.
06.
Clean
Automatic cleaning supports the chloride measurement system between planned maintenance visits.
Designed for practical chloride monitoring
The modular AccuSeries design keeps wet-chemistry components accessible while chloride results, diagnostics and method controls remain available through the interface.
Touchscreen
Clear access to chloride results, status and analyser functions.
Data logging
Integrated chloride result storage with USB export.
Separate compartments
Electronic and wet-chemistry sections are physically separated.
Low reagent use
Small reagent volumes help control chloride measurement costs.
Chloride technical specifications
Core AccuSeries information for chloride application and specification review.
| Measurement principle | Application-specific approved method |
| Variables | Chloride, range and sample matrix dependent; approved method |
| Typical response | T-90 typically 3 to 15 minutes; method dependent |
| Power supply | 24 VDC or 90 to 240 VAC; 310 W |
| Sampling | Single stream or up to 6 streams |
| Cabinet | Painted 304 stainless steel |
| Protection grade | IP66; NEMA 4X |
| Outputs | 4-20 mA; optional Modbus TCP/IP or serial |
| Automatic functions | Sampling, calibration, validation and post-wash as configured |
Chloride, range, sample conditions, wetted materials and final specifications must be confirmed for the configured method before procurement.
Discuss your chloride measurement
Tell PMA about your sample, measuring range and process objective. An applications engineer will review whether AccuSeries and an available analytical method are appropriate.
Win A Google Pixel Tablet
From pH panels to sludge settlement analysers, PMA delivers the instrumentation and support your facility relies on. We are currently offering a Google Pixel Tablet to one lucky operator who contacts us to discuss a project or service requirement.
Terms and conditions apply. Prize draw entry requires a valid enquiry regarding PMA Ltd products or services. Valid for UK and Ireland residents only.